SPECIFICATIONS
The MINI SATLOOK
is a swedish made SAT-TV instrument. The unit is made for exact alignment and
adjustment of satellite-dishes. It is intended for professional use when high
accuracy and precise information are needed. It´s easily operated without a lot
of unnecessary buttons and knobs. The basic functions are easy to get a hold on
and takes only minutes to learn. The instrument is provided with a 3" LCD which
either shows Sat-signal strength or Digital information.
The MINI
SATLOOK is unique as it can measure satellite signal from two LNBs at the same
time. Signalstrength is presented graphical on the LCD-display in form of
thermometer-scales. It can present pitchtones (the higher tone the better
signal) on a loudspeaker. MINI SATLOOK also show Digital information like BER
(bit error rate), constellation-diagram (QPSK) and S/N (signal/noise ratio).
The NIT function can identify the various TV-satellites by reading out the NIT
in the Bitstream (NIT = Network Information Table). The NIT also contains info
about the transponders TV and Radio-channels. SATLOOK Micro can store up to 99
positions of Satellite transponder information. The instrument can easily scan
through the memory positions and identify the various Satellite transponders.
The polarisation of the LNB is switchable 13V/18V and the Hi-Lo band with 22
kHz-tone. The DiSEqC-function controls all DiSEqC-accessories (like switches,
LNB´s and actuators). The power of the instrument is supplied by a built in and
rechargeable battery. Even though the instrument has a lot of functions it is
still very light and flexible.
Input
frequency: 920-2150MHz.
Sat-TV min level
in: About 35 dBuV (noise).
Sat-TV max level
in: About 100 dBuV.
Input/output impedance:
75 Ohm, F-connectors.
Measuring method (analog):
Signal presentation on LCD display
in
form of thermometer scales.
Pitch-tone,
highest tone on
loudspeaker.
Measuring
method (Digital): BER (bit error rate)
S/N (signal/noise-ratio)
Constellation
(QPSK)
Max-level: Thermometer scales
showing max.
Maxhold
function.
BER,
S/N and QPSK showing max.
Satellite-identification: Yes,
by reading out the NIT in the
bitstream.
Info about the TV and Radio
channels.
Memory: Up to 99
transponders can be stored
with
name.
Memory locks on: FEC, Symbol-rate
Frecuency, 13/18v,
22kHz.
Memory search: The instrument scans the
memory
positions
and presents the matching
transponders.
Presentation: On LCD
3”
PC-connection: Yes,
RS232-output
Power out: Yes,
13-18V.
22 kHz tone: Yes,
on/off.
DiSEqC: Yes, all 1.0 and
1.1. Also Toneburst on/off.
DiSEqC actuator:
Built in positioner for DiSEqC 1.2, SatScan and
SatSelect.
Battery: Rechargable
12v, 3.5 amp/hour.
Operational: About
1 hour on a fully charge
Battery.
Weight:
About 2 kg incl. battery
Accessories: Nylon
carrying-case.
Power-supply of 220v/13.5v,1.7amp.
Car-charger.
BNC/F-adapter.
eldanmark.dk
